High-pressure lance HL-H with water driven motor

High-pressure lance HL-H

Effective high pressure IBC and tank cleaning with water motor

  • 360° and 270° spray head possible
  • strong jet power with low consumption values
  • working pressure 180 – 200 bar
  • operation with standard high pressure cleaners
  • compact dimensions, easy to handle
  • hygienic and low-wear application

Technical Data

Property Value
Max. cleaning diameter 2 meters
Spray pattern 360° / 270° orbital
Number of nozzles 2, 3 or 4 nozzles
Nozzle types 0° spot jet, optional 5/15° flat jet nozzle
Pressure range 180 – 200 bar
Flow rate 30 – 80 LPM (1.8 – 4.8 m³/h)
Max. operating temperature 90°
Insertion opening 38 – 78 mm, depending on spray head type
Rotation speed 10 – 30 rpm, adjustable
Noise emission not measurable, measured at the drive
Shaft length 200 – 4000 mm, special lengths on request
Mounting position any
Weight 5 – 20 kg, depending on shaft length
Materials Stainless steel 316L, 304, 301, Viton, (EPDM/PTFE) more on request
Liquid connection 3/8″ male thread, optional M22x1.5 male thread
Nozzle thread 1/8″, M6, M4, depending on device
Certificates 2.2, CE, ATEX, FDA on request
Ex version optional, only possible with HL-A and HL-H

High-pressure cleaners operate with a three-dimensionally rotating spray head, driven by an electric, compressed air or water-hydraulic motor. An orbital motion of both rotational axes forms a 360-degree spray pattern.
An extensive selection of spray head types allows these units to be used in a wide variety of applications.

The use of these devices is simple, these pressure washers can be connected to almost any standard high-pressure unit and stationary high-pressure pump. The shaft length of a device can be designed between 140 mm and 4000 mm, depending on the needs.
Compressed air and water-hydraulically driven variants are suitable for use in EX zones, and many of the unit types offered are FDA-compliant.
An extensive range of accessories is available for handling and installation.

HL-H-R55 HL-H-R40 HL-H-R32 HL-H-R37 HL-H-RD HL-H-RC HL-H-RW
Material 316L 316L 316L 316L 316L 316L 316L
Number of nozzles 2/3/4 2/3/4 2 2 4 2 2
Insertion opening min. 54 50 38 38 78 56 68
Nozzle thread 1/8″ M6 M4 M4 1/8″ 1/8″ 1/8″
Amount max. LPM 50 50 30 30 80 50 50
Temperature max. 90°C 90°C 90°C 90°C 90°C 90°C 90°C
Spray pattern 360° 360° 360° 360° 360° 360° 270°
Rotation rpm 10 – 30 rpm, adjustable
Noise emission not measurable, measured at the drive

Spray head R55

Spray head types HL R55

Dimensions HL R55

Dimensions HL R55

max. 250 bar, max. 50 liters/minute
max. shaft length: 4000 mm
Minimum dimension of the installation opening for linear insertion of the spray heads.

Datasheet HR55 (water drive with universal head R55): Download PDF
Working pressure: 100 – 200 bar · Flow rate: 10 – 50 LPM · Speed: 10 – 30 rpm, adjustable via water volume · Nozzles: 2 pcs. (optionally 3 or 4), 0° / 5° / 15°, 1/8″ · Insertion opening: larger than Ø 60 mm · Max. temperature: 90 °C

Spray head R40

Spray head types HL R40

Dimensions HL R40

max. 250 bar, max. 50 liters/minute
max. shaft length: 4000 mm
Minimum dimension of the installation opening for linear insertion of the spray heads.

Datasheet HR40 (water drive with compact head R40): Download PDF
Working pressure: 100 – 200 bar · Flow rate: 10 – 50 LPM · Speed: 10 – 30 rpm, adjustable via water volume · Nozzles: 2 pcs., 0° / 5° / 15°, M6 · Insertion opening: larger than Ø 50 mm · Max. temperature: 90 °C

Spray head R32

Spray head types HL R32

Abmessungen-HL-R32

max. 180 bar, max. 30 liters/minute
max. shaft length: 4000 mm
Minimum dimension of the installation opening for linear insertion of the spray heads.

Spray head R37

Spray head types HL R37

Dimensions HL R37

max. 180 bar, max. 30 liters/minute
max. shaft length: 4000 mm
Minimum dimension of the installation opening for linear insertion of the spray heads.

Datasheet HRK (water drive with ball head RK): Download PDF
Working pressure: 100 – 180 bar · Flow rate: 10 – 30 LPM · Speed: 10 – 30 rpm, adjustable via water volume · Nozzles: 2 pcs., 0° / 5° / 15°, M4 · Insertion opening: larger than Ø 38 mm · Max. temperature: 90 °C

Double spray head RD

Spray head types HL RD

Dimensions HL RD

max. 200 bar, max. 80 liters/minute
max. shaft length: 4000 mm
Minimum dimension of the installation opening for linear insertion of the spray heads.

Datasheet HRD (water drive with double head RD): Download PDF
Working pressure: 100 – 200 bar · Flow rate: 10 – 80 LPM · Speed: 10 – 30 rpm, adjustable via water volume · Nozzles: 4 pcs., 0° / 5° / 15°, 1/8″ · Insertion opening: larger than Ø 78 mm · Max. temperature: 90 °C

Sealed Spray head RC

Spray head types HL RC

Dimensions HL RC

Dimensions HL RC

max. 250 bar, max. 50 liters/minute
max. shaft length: 4000 mm
Minimum dimension of the installation opening for linear insertion of the spray heads.

Datasheet HRH (water drive with hygienic head RH): Download PDF
Working pressure: 100 – 200 bar · Flow rate: 10 – 50 LPM · Speed: 10 – 30 rpm, adjustable via water volume · Nozzles: 2 pcs., 0° / 5° / 15°, 1/8″ · Insertion opening: larger than Ø 65 mm · Max. temperature: 90 °C

Angular Spray head RW

Spray head types HL RW

Dimensions HL RW

Dimensions HL RW

max. 250 bar, max. 50 liters/minute
max. shaft length: 4000 mm
Minimum dimension of the installation opening for linear insertion of the spray heads.

Datasheet HRW (water drive with angle head RW): Download PDF
Working pressure: 100 – 200 bar · Flow rate: 10 – 50 LPM · Speed: 10 – 30 rpm, adjustable via water volume · Nozzles: 2 pcs., 0° / 5° / 15°, 1/8″ · Insertion opening: larger than Ø 68 mm · Max. temperature: 90 °C

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All data are without guarantee. (As of: 26.12.2022-71427321893-1888948-71042)