Spray balls – special designs

Sprühkugeln – Sonderausfuehrungen

Special pipe sizes, surfaces and connections

  • Spray balls with special pipe sizes, surfaces or connections
  • Retaining clamps as spare parts, with inspection certificate 3.1

Spray balls with special pipe sizes, surfaces or connections.

Clamp connection for pipe 28 mm – DN25 according to DIN 11850 Series 1 · material 1.4404 (316L) · matt

Type Spray angle Cleaning Ø (m) Flow rate m³/h at pressure (bar) DA (mm) LA (mm) Connection Order code
1.0 1.5 1.8 2.0 2.2 2.5
A 1-1.0 360° 1.5 – 2.0 3.0 3.7 4.0 4.2 4.4 4.7 on req. on req. Pipe 28 253-109.68
A 1-1.5 360° 1.8 – 3.0 7.0 8.6 9.4 9.9 10.4 11.1 on req. on req. Pipe 28 253-109.70
A1 360° 2.0 – 3.0 9.8 12.0 13.1 13.9 14.5 15.5 64 84 Pipe 28 253-109.10
A 1-1 360° 2.5 – 3.5 12.8 15.7 17.2 18.1 19.0 20.2 on req. on req. Pipe 28 253-109.11
A 1-2 360° 3.0 – 4.0 15.3 18.7 20.5 21.6 22.6 24.1 on req. on req. Pipe 28 253-109.12
B1 192° 2.0 – 3.0 9.5 11.6 12.7 13.4 14.1 15.0 on req. on req. Pipe 28 253-109.13
B 1-2 Performance data on request on req. on req. Pipe 28 253-109.15
L1 188° 2.5 – 3.0 8.6 10.5 11.5 12.2 12.8 13.6 on req. on req. Pipe 28 253-111.38

Clamp connection, other pipe sizes – Material 1.4404 (316L) · matt

Type Spray angle Cleaning Ø (m) Flow rate m³/h at pressure (bar) DA (mm) LA (mm) Connection Order code
1.0 1.5 1.8 2.0 2.2 2.5
A 05-1.0 360° 0.8 – 1.0 2.8 3.4 3.8 4.0 4.2 4.4 on req. on req. DN15 253-109.05
A1 360° 2.0 – 3.0 9.8 12.0 13.1 13.9 14.5 15.5 on req. on req. ISO 26.9 253-109.03
G 1-1 206° 2.5 – 3.5 11.2 13.7 15.0 15.8 16.6 17.7 on req. on req. Pipe 30 253-109.32
A2 360° 3.5 – 5.0 21.9 26.8 29.4 31.0 32.5 34.6 on req. on req. Pipe 52 253-109.82

Clamp connection pipe 34 – Material Alloy 59 (2.4605) · matt

Type Spray angle Cleaning Ø (m) Flow rate m³/h at pressure (bar) DA (mm) LA (mm) Connection Order code
1.0 1.5 1.8 2.0 2.2 2.5
LA 1-1.5 360° 2.5 – 3.0 11.0 13.5 14.8 15.6 16.3 17.4 64 on req. Pipe 34 253-111.75

Clamp connection DIN 11850, ground – Material 1.4404 (316L) · ground instead of matt

Type Spray angle Cleaning Ø (m) Flow rate m³/h at pressure (bar) DA (mm) LA (mm) Connection Order code
1.0 1.5 1.8 2.0 2.2 2.5
A 05-1.0 360° 0.8 – 1.0 2.8 3.4 3.8 4.0 4.2 4.4 28 46.6 Pipe 13 254-200059
B1 192° 2.0 – 3.0 9.5 11.6 12.7 13.4 14.1 15.0 64 84 Pipe 29 254-200062

Welded connection inch ½" – without 3A · ground

Type Spray angle Cleaning Ø (m) Flow rate m³/h at pressure (bar) DA (mm) LA (mm) Connection Order code
1.0 1.5 1.8 2.0 2.2 2.5
A 05-1.0 360° 0.8 – 1.0 2.4 2.9 3.2 3.4 3.6 3.8 on req. on req. ½" (12.7) 253-114.36

on req. = on request. Recommended operating pressure 1.0 to 2.5 bar g at the spray ball inlet. Guide value for cleaning liquid: 30 to 50 l/min per metre of tank circumference.

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status: 03.10.2026)

Retaining clamps (with inspection certificate 3.1)

Order code Designation Ball Ø Surface Material
253-107.03 Retaining clamp 05/M 28 28 mm matt 1.4310
253-107.06 Retaining clamp 05/E 28 28 mm electropolished 1.4310
253-107.08 Retaining clamp 05/M 28 28 mm matt Hastelloy C4 (2.4610)
253-107.01 Retaining clamp 1/M 64 64 mm matt 1.4310
253-107.04 Retaining clamp 1/E 64 64 mm electropolished 1.4310
253-107.07 Retaining clamp 1/M 64 64 mm matt Hastelloy C4 (2.4610)
253-107.02 Retaining clamp 2/M 93 93 mm matt 1.4310
253-107.05 Retaining clamp 2/E 93 93 mm electropolished 1.4310

Retaining clamp as spare part for spray balls

Cleaning lance

Special accessory for all spray ball types. Material 1.4404, design according to requirements and customer specifications.

Cleaning lance for spray balls