Turbo SSB 75 Rotating Nozzle

Plain bearing nozzle with slow rotation

360° low pressure plain bearing nozzle
slow rotation and small amounts of liquid
FDA compliant & EX certified
acid, alkali and temperature resistant
compact dimensions
self-cleaning, hygienic, low-wear
high operational reliability

Technical Data

Technical Data	Value
Max. cleaning diameter:	4.7 meters
Spray pattern:	360°
Pressure range:	2 – 10 bar
Flow rate:	60 – 153 LPM (3.6 – 9.2 m³/h)
Insertion opening:	SSB 75 BSP/NPT min. Ø 60 mm, cotter pin min. Ø 85 mm SSB 75 CS BSP/NPT min. Ø 45 mm, cotter pin min. Ø 85 mm
Mounting position:	arbitrary, preferably vertical downwards
Weight:	approx. 0.37 KG
Materials:	Stainless Steel 316L (1.4404), C.PTFE, PTFE
Pipe connection:	3/4″ Internal Thread BSP (NPT)
Optional Pipe Connections:	1″ cotter pin, DN25 cotter pin
Nozzle characteristics:	Ball with slots
Certificates:	3.1, 2.2, ATEX, FDA Regulation (EC) No 1935/2004
Max. operating temperature:	95°C (203°F)
Max. ambient temperature:	140°C (284°F), 30 Min.
Operating recommendation:	It is recommended to install a filter/strainer (500 μm) in the CIP supply line to the tank cleaner to protect it from particle clogging or damage.

Optimal Operation

The pressure range for operating a Turbo SSB 75 is 2 – 10 bar at the cleaning nozzle.
With a flow rate of 60 – 153 liters/minute, a cleaning diameter of 3 – 4.7 meters is achieved.

The Turbo SSB 75 is a slowly rotating rotary nozzle. During operation, liquid flowing through it sets the ball head into a steady braked rotation. In the process, flat jets of liquid with a long range emerge through slots. The slow rotation of the nozzle favours an effective bundled liquid impact with a high impact effect. This achieves a cleaning effect of up to 4.7 metres in diameter. The Turbo SSB is equipped with an extremely low-wear slide bearing system that is permanently flushed with liquid, thus achieving extremely long service lives. Even brief exposure to steam or compressed air does not cause any damage. After years of permanent use within a wide variety of industrial applications, no operational failures caused by wear have been detected. The nozzle can be easily cleaned of solids by means of a removable ball head.

The Turbo SSB meets the highest hygiene standards as well as FDA requirements and is suitable for use in potentially explosive atmospheres. The Turbo SSB 75 is available as a CS version without a split pin on the ball head or completely without a split pin. Turbo SSB are available in 3 sizes and many connection types. Common applications for Turbo SSB 75 rotary nozzles are found in the dairy, food, beverage, pharmaceutical and chemical industries for cleaning production, process or transport containers.

We strongly recommend the installation of a 500 micron filter/strainer in the CIP supply line close to the tankwasher
to protect it against particulate blocking or damage.

Connection Types

Threaded Connection

Turbo SSB 75 standard devices are equipped with a 3/4″ cylindrical internal thread BSP (British Standard PIPE according to DIN ISO 228). The device is optionally available with a 3/4″ conical internal thread NPT (National Pipe Taper, American pipe thread for self-sealing connections).

Cotter pin connection

The Turbo SSB 75 is optionally available with 1″ or DN25 Split pin attachment. The Split pin attachment ensures that the cleaning nozzle is attached without dead space. Split pin versions have an approx. 15% higher flow rate compared to other connection types.

Turbo SSB 75 - Product Selection Connection Types / Variants

Turbo SSB 75 with 3/4″ threaded connection

Connection	Spray pattern	Type	Product code	Materials	EX	FDA	Article number
3/4″ BSP	360°	Standard	TSSB75AF-360-BSP	316L/C-PTFE	✔	✔	4660-2337-113
3/4″ BSP	360°	Standard	TSSB75F-360-BSP	316L/PTFE		✔	4660-2336-112
3/4″ NPT	360°	Standard	TSSB75AF-360-NPT	316L/C-PTFE	✔	✔	4660-2341-213
3/4″ NPT	360°	Standard	TSSB75F-360-NPT	316L/PTFE		✔	4660-2346-212
3/4″ BSP	360°	EPO	TSSB75F-360-BSP-EPO	316L/PTFE		✔	4660-2347-713

Turbo SSB 75 with butt-weld connection (BW)

Connection	Spray pattern	Type	Product code	Materials	EX	FDA	Article number
1″ butt weld (BW)	360°	Standard	TSSB75AF-360-BW	316L/C-PTFE	✔	✔	4660-2344-313
1″ butt weld (BW)	360°	Standard	TSSB75F-360-BW	316L/PTFE		✔	4660-2344-312
DN25 butt weld (BW)	360°	Standard	TSSB75AF-360-DN25-BW	316L/C-PTFE	✔	✔	4660-2345-317
DN25 butt weld (BW)	360°	Standard	TSSB75F-360-DN25-BW	316L/PTFE		✔	4660-2345-316

Turbo SSB 75 with cotter pin/PIN FIX connection

Connection	Spray pattern	Type	Product code	Materials	EX	FDA	Article number
1″ cotter pin/PIN FIX	360°	Standard	TSSB75AF-360-PF	316L/C-PTFE	✔	✔	4660-2342-413
1″ cotter pin/PIN FIX	360°	Standard	TSSB75F-360-PF	316L/PTFE		✔	4660-2347-412
1″ cotter pin/PIN FIX, short	360°	PF SHO	TSSB75F-360-PF-SHO	316L/PTFE		✔	4660-2347-413
DN25 cotter pin/PIN FIX	360°	Standard	TSSB75AF-360-DN25	316L/C-PTFE	✔	✔	4660-2558-413
DN25 cotter pin/PIN FIX	360°	Standard	TSSB75F-360-DN25	316L/PTFE		✔	4660-2558-414
DN25 cotter pin/PIN FIX, short	360°	PF SHO	TSSB75AF-360-DN25-PF-SHO	316L/C-PTFE	✔	✔	4660-2558-429
1″ cotter pin/PIN FIX	360°	EPO	TSSB75AF-360-PF-EPO	316L/C-PTFE	✔	✔	4660-2347-715
1″ cotter pin/PIN FIX	360°	EPO	TSSB75F-360-PF-EPO	316L/PTFE		✔	4660-2347-712
DN25 cotter pin/PIN FIX	360°	EPO	TSSB75AF-360-DN25-EPO	316L/C-PTFE	✔	✔	4660-2347-716

Discontinued CS versions – alternative product on request

Connection	Spray pattern	Type	Product code	Materials	EX	FDA	Article number
3/4″ BSP	360°	CS	TSSB75AF-CS360-BSP	316L/C-PTFE	✔	✔	4660-2558-421
3/4″ BSP	360°	CS	TSSB75F-CS360-BSP	316L/PTFE		✔	4660-2558-418
3/4″ NPT	360°	CS	TSSB75AF-CS360-NPT	316L/C-PTFE	✔	✔	4660-2558-422
3/4″ NPT	360°	CS	TSSB75F-CS360-NPT	316L/PTFE		✔	4660-2558-424
1″ cotter pin/PIN FIX	360°	CS	TSSB75AF-CS360-PF	316L/C-PTFE	✔	✔	4660-2558-423
1″ cotter pin/PIN FIX	360°	CS	TSSB75F-CS360-PF	316L/PTFE		✔	4660-2558-425
DN25 cotter pin/PIN FIX	360°	CS	TSSB75AF-CS360-DN25	316L/C-PTFE	✔	✔	4660-2558-420
DN25 cotter pin/PIN FIX	360°	CS	TSSB75F-CS360-DN25	316L/PTFE		✔	4660-2558-419

Cotter pin/PIN FIX versions have approx. 15% higher flow rates than the threaded versions.

PF SHO denotes the short PIN FIX version. EPO denotes the externally electropolished version with Ra ≤ 0.4 µm.

All versions are FDA compliant. The EX/ATEX version is only available with C-PTFE. 3.1 certificate for all versions.

The CS versions are no longer available. An alternative product is available on request.

Accessories

Installation Lance

Materials:	Stainless Steel 1.4404 (316L), EPDM, FKM
Certificates:	3.1, 2.2
Device Connection:	3/4″ male BSP (1″ cotter pin)
Tank Connection:	Flange as needed
Sensor:	with/without SMW 100

SMW 100 Fluidity Sensor

Materials:	1.4305, PEEK
Connection Type:	Welding Sleeve
Function:	Sensor surge is displayed every 20 seconds

The data, technical data and information presented do not release the user from the obligation to check the suitability of the products supplied for the intended application. All information is without guarantee. (Status of: 27.10.2022-71427321893-1888948-71042)